No products in the basket.
All Other IC's
CS5460A BS Single Phase Bi Directional Power/Energy IC SMD SSOP 24 Package
₹235.20 (incl. tax)
CS5460A BS Single Phase Bi Directional Power/Energy IC SMD SSOP 24 Package
The CS5460A is a highly integrated energy / power metering IC, designed for single-phase (2- or 3-wire) systems. It features bi-directional energy measurement, meaning it can measure power flow in both directions (e.g. for regenerative systems). Combines two ΔΣ ADCs, a power calculation engine, and a serial digital interface. Includes on-chip functions: real energy, IRMS, VRMS, instantaneous power, and energy-to-pulse conversion. “Auto-Boot” mode: can read calibration data from a serial EEPROM and start measuring even without a microcontroller. Provides AC or DC system calibration support. On-chip 2.5 V reference (very stable, drift up to 60 ppm/°C). Low typical power consumption: < 12 mW.
Click here to view related products
Features:-
- Energy Data Linearity: ±0.1% of Reading over 1000:1 Dynamic Range.
- On-Chip Functions: (Real) Energy, I
- V, IRMS and VRMS, Energy-to-Pulse Conversion
- Smart “Auto-boot” Mode from Serial EEPROM Enables Use without MCU.
- AC or DC System Calibration
- Mechanical Counter/Stepper Motor Driver
- Meets Accuracy Spec for IEC 687/1036, JIS
- Typical Power Consumption <12 mW
- Interface Optimized for Shunt Sensor
- V vs. I Phase Compensation
- Ground-Referenced Signals with Single Supply
- On-chip 2.5 V Reference (MAX 60 ppm/°C drift)
- Simple Three-wire Digital Serial Interface
- Watch Dog Timer
- Power Supply Monitor
- Power Supply Configurations VA+ = +5 V; VA- = 0 V; VD+ = +3.3 V to +5 V
Specification:-
| Symbol | Parameters | Min | Max | Units |
| IIN | Input Current, Any Pin Except Supplies | ±10 | mA | |
| IOUT | Output Current | ±25 | mA | |
| PD | Power Dissipation | 500 | mW | |
| VINA | Analog Input Voltage | (VA-) – 0.3 | (VA+) + 0.3 | V |
| VIND | Digital Input Voltage | DGND – 0.3 | (VD+) + 0.3 | V |
| TA | Ambient Operating Temperature | -40 | 85 | °C |
| Tstg | Storage Temperature | -65 | 150 | °C |
Application
- The IC measures current (via a shunt resistor or current transformer) and voltage (via resistive divider or potential transformer), then digitizes them using its internal ΔΣ converters.
- It calculates real (true) power, energy, RMS current, RMS voltage, and generates a pulse output that’s proportional to the measured energy.
- The energy-to-pulse converter lets you drive a counter or stepper motor directly for “mechanical kWh meter” style energy tracking.
- Auto-boot mode: on power-up, the IC can load calibration from EEPROM, so you don’t necessarily need a microcontroller– this saves BOM cost and simplifies design.
- Useful for smart meters, sub-metering, power monitoring, and energy management systems
*Product image for illustration purposes only, actual product may vary.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet