Free delivery on all orders above Rs 999/-
Get 50rs Discount in Your First Order (Coupon code) – NEW50


CD4029 Binary Decade Up-Down Counter IC DIP-16 Package

14.00 Excluding tax

Category: Tag:
Share with Friends

CD4029 consists of a four-stage binary or BCD-decade up/ down counter with provisions for look-ahead carry in both counting modes. The inputs consist of a single CLOCK, CARRY-IN (CLOCK ENABLE), BINARY/DECADE, UP/DOWN, PRESET ENABLE, and four individual JAM signals. Q1, Q2, Q3, Q4 and a CARRY OUT signal are provided as outputs.

A high PRESET ENABLE signal allows information on the JAM INPUTS to preset the counter to any state asynchronously with the clock. A low on each JAM line, when the PRESET-ENABLE signal is high, resets the counter to its zero count. The counter is advanced one count at the positive transition of the clock when the CARRY-IN and PRE-SET ENABLE signals are low. Advancement is inhibited when the CARRY-IN or PRESET ENABLE signals are high. The CARRY-OUT signal is normally high and goes low when the counter reaches its maximum count in the UP mode or the minimum count in the DOWN mode provided the CARRY-IN signal is low. The CARRY-IN signal in the low state can thus be considered a CLOCK ENABLE.

The CARRY-IN terminal must be connected to VSS when not in use. Binary counting is accomplished when the BINARY/DECADE input is high; the counter counts in the decade mode when the BINARY/DECADE input is low. The counter counts up when the UP/DOWN input is high, and down when the UP/DOWN input is low. Multiple packages can be connected in either a parallel clocking or a ripple-clocking arrangement as shown in Figure 17. Parallel clocking provides synchronous control and hence faster response from all counting outputs. Ripple-clocking allows for longer clock input rise and fall times. The CD4029 is supplied in these 16-lead outline packages: Braze Seal DIP H4X Frit Seal DIP H1F Ceramic Flatpack H6W.


  • High-Voltage Type (20V Rating)
  • Medium Speed Operation: 8MHz (Typ.) at CL = 50pF and VDD – VSS = 10V
  • Multi-Package Parallel Clocking for Synchronous High Speed Output Response or Ripple Clocking for Slow Clock Input Rise and Fall Times
  • “Preset Enable” and Individual “Jam” Inputs Provided
  • Binary or Decade Up/Down Counting
  • BCD Outputs in Decade Mode
  • 100% Tested for Maximum Quiescent Current at 20V
  • 5V, 10V and 15V Parametric Ratings
  • Standardized Symmetrical Output Characteristics
  • Maximum Input Current of 10A at 18V Over Full Package-Temperature Range; 100nA at 18V and +25oC
  • Noise Margin (Over Full Package Temperature Range): – 1V at VDD = 5V – 2V at VDD = 10V – 2.5V at VDD = 15V
  • Meets All Requirements of JEDEC Tentative Standards No. 13B, “Standard Specifications for Description of “B” Series CMOS Device’s


Parameter Specification
Part number CD4029BMS
DC Supply Voltage Range, (VDD)  -0.5V to +20V
Input Voltage Range, All Inputs  -0.5V to VDD +0.5V
DC Input Current, Any One Input ±10mA
Operating Temperature Range  -55°C to +125°C
Storage Temperature Range (TSTG)  -65°C to +150°C
Lead Temperature (During Soldering)  +265°C


* product image for illustration purposes only. actual product may vary.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…